Service-Hotline +49 (3437) 92 33 0    

  

Grinding and Milling Machines


Concrete grinder Eibenstock EBS 235.1





+ technical data and information

Typ EBS 235.1
Power consumption W 2200
Rated voltage V 230
Slices 235 mm
Idle rotation 1380 min
Tool holder M 20 outside/spezial
Weight 38 kg


+ matching tools

Diamond grinding disc





+ application / diameter

Application: concrete

Diameter
235 mm




Fitted base plate





+ application / diameter

Application: concrete

Diameter
mm




Base plate





+ application / diameter

Application: concrete

Diameter
mm




PCD Grinding Shoe Set 5-pc. with support segment, circular segments





+ application / diameter

Application: concrete, screed, tile adhesive, stone, paint, coatings, carpet glue

Diameter
mm




EBS sanding pad concrete





+ application / diameter

Application: concrete

Diameter
mm




EBS sanding shoe screed





+ application / diameter

Application: Screed

Diameter
mm



Grinding Schwamborn DSM 250





+ technical data and information

Typ DSM 250
Voltage V 230
Workspace 250 mm
Tool 250 mm
Grinding pressure 35 kg
Speed, Tool 1450 min-1
extraction 50 mm
Weight 57 kg


+ matching tools

Recording plate with Velcro cpl, -. 250 mm, for diamond pads, 1 pc required
Milling plate surfaces cpl. required with 24 solid carbide blades Star, 1 piece

Application: For roughening, removing filler, adhesives, coatings, soil residue, foam back
Kit cpl. with 24 Replacement carbide blades Star, 18 washers, 12 bearing blocks
Extension cord, special, 230V/50Hz, 20m, 16A, 2.5 mm
EX-SSC 20E, red

Application: very abrasive surfaces
EX-GC 20E, black

Application: concrete standard
EX-GC 40E, black

Application: concrete standard
EX-HC 20E, gelb

Application: concrete standard
EX-HC 40E, yellow

Area of ​​application: Concrete, very hard



Grinding Schwamborn DSM 430





+ technical data and information

Typ DSM 430
Voltage V 230
Frequenz Hz 50
Motor 2,2 kW
working width 430 mm
work to the brim 10 mm
Grinding pressure 70 - 95 kg
Tool 160 mm
Speed, Tool 400 - 1200 min-1
extraction 50 mm
work weight 103 kg


+ matching tools

Scrub brush, PPN / wire 0.7 mm, with mounting plate, max. 600 r / min
Spring steel brush with receiving plate max. 600 r / min
Pad -150 mm, white
Pad -150 mm, red
Pad -150 mm, black



Grinding Schwamborn DSM 530





+ technical data and information

Typ DSM 530
Voltage V 400
Frequenz Hz 50
Motor 4 kW
working width 530 mm
work to the brim 10 mm
Grinding pressure 110 kg
Tool 200 mm
Speed, Tool 400 - 1200 min-1
water tank 10 l
extraction 50 mm
work weight 152 kg


+ matching tools

ETX recording disc - 200 mm for metal-bonded diamond, 3 pcs. required

Area of Application: For mounting the metal-bonded diamond
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required

Area of Application: For mounting resin diamond pads
Surface Cutter cpl. 12 Solid Carbide Star slats, 30 x 11.5 x 6.0 mm, 3 pcs. required

Application: For roughening, removing filler, adhesives, coatings, soil residue, foam back
Kit cpl., 36 x Replacement carbide blades Star, 27 slices, 9 x blades rods
EX-SC red available with different grain sizes

Application: For abrasive surfaces
EX-GC black with different grits available

Application: concrete standard
EX-HC yellow available with different grain sizes

Application: concrete, very hard
EX-VSF orange available with different grain sizes

Application: concrete and coatings, extremely hard
EX-SBC green available with different grain sizes

Application: natural stone, terrazzo, marble
EX-SBG blue available with different grain sizes

Application: Granite
EX-Pull-D, R, gold

Application: coatings, adhesives
EX-Pull-S, R, gold

Application: coatings, adhesives
Best-Polish, dry available with different grain sizes

Application: Diamondpad, dry, concrete, cast stone, terrazzo, 76 mm, H 10 mm
Hybrid available with different grain sizes

Application: Diamondpad, dry, very aggressive for removing sanding marks, concrete, terrazzo, 76 mm, h 8 mm
Lux available with different grain sizes

Application: Diamondpad, Wet, for granite, glasterrazzo, 76 mm, H 10 mm
All Grind with different grits available

Application: Diamondpad, Wet, for marble, granite, 76 mm, 8 mm H
Epox available with different grain sizes

Application: Diamondpad, Wet, for Microterrazzo, glasterrazzo, 76 mm, 8 mm H



Grinding Schwamborn DSM 530S





+ technical data and information

Typ DSM 530S
Voltage V 400
Frequenz Hz 50
Motor 7,5 kW
working width 530 mm
work to the brim 10 mm
Grinding pressure 165 kg
Tool 230 mm
Speed, Tool 400 - 1200 min-1
water tank 15 l
extraction 76 mm
work weight 238 kg


+ matching tools

ETX-up pads, System DIF Diaflex - 230 mm, 3 pcs. required

Area of Application: For mounting the metal-bonded diamond
Shot Plate for foreign tools, - 230 mm, 3 pcs. required
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required

Area of Application: For mounting resin diamond pads
Surface Cutter cpl. 15 Solid Carbide Star slats, 30 x 11.5 x 6.0 mm, 3 pcs. required

Application: For roughening, removing filler, adhesives, coatings, soil residue, foam back
Kit cpl., 45 x Replacement carbide blades Star, 36 discs, 9 x blades rods
EX-SC red available with different grain sizes

Application: For abrasive surfaces
EX-GC black with different grits available

Application: concrete standard
EX-HC yellow available with different grain sizes

Application: concrete, very hard
EX-VSF orange available with different grain sizesr

Application: concrete and coatings, extremely hard
EX-SBC green available with different grain sizes

Application: natural stone, terrazzo, marble
EX-SBG blue available with different grain sizes

Application: Granite
EX-Pull-D, R, gold

Application: coatings, adhesives
EX-Pull-S, R, gold

Application: coatings, adhesives
Best-Polish, dry available with different grain sizes

Application: Diamondpad, dry, concrete, cast stone, terrazzo, 76 mm, H 10 mm
Hybrid available with different grain sizes

Application: Diamondpad, dry, very aggressive for removing sanding marks, concrete, terrazzo, 76 mm, 8 mm H
Lux available with different grain sizes

Application: Diamondpad, Wet, for granite, glasterrazzo, 76 mm, H 10 mm
All Grind with different grits available

Application: Diamondpad, Wet, for marble, granite, 76 mm, 8 mm H
Epox available with different grain sizes

Application: Diamondpad, Wet, for Microterrazzo, glasterrazzo, 76 mm, h 8 mm



Grinding Schwamborn DSM 650S





+ technical data and information

Typ DSM 650S
Voltage V 400
Frequenz Hz 50
Motor 11 kW
working width 650 mm
work to the brim 10 mm
Grinding pressure 200-260 kg
Tool 230 mm
Speed, Tool 400 - 1200 min-1
water tank 15 l
extraction 76 mm
work weight 310 kg


+ matching tools

ETX-up pads, System DIF Diaflex - 230 mm, 3 pcs. required
To accommodate metal-bonded diamond
Shot Plate for foreign tools, - 230 mm, 3 pcs. required
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required
Application: For mounting resin diamondpad
Surface Cutter cpl. 15 Solid Carbide Star slats, 30 x 11.5 x 6.0 mm, 3 pcs. required
Use: For roughening, removing filler, adhesives, coatings, soil residue, foam back
Kit cpl., 45 x Replacement carbide blades Star, 36 discs, 9 x blades rods
Additional weight, swivel, 2 x 25 kg kit = 2 pieces, in order to increase the grinding pressure
EX-SC red with different grits available
Application: For abrasive surfaces
EX-GC black with different grits available

Application: concrete standard
EX-HC yellow with different grits available

Application: concrete, very hard
EX-VSF orange with different grits available

Application: concrete and coatings, extremely hard
EX-SBC grn mit unterschiedlichen Krnungen lieferbar

Application: natural stone, terrazzo, marble
EX-SBG blue available with different grain sizes

Application: Granite
EX-Pull-D, R, gold

Application: coatings, adhesives
EX-Pull-S, R, gold

Application: coatings, adhesives
Best-Polish, dry available with different grain sizes

Application: Diamondpad, dry, concrete, cast stone, terrazzo, 76 mm, H 10 mm
Hybrid available with different grain sizes

Application: Diamondpad, dry, very aggressive for removing sanding marks, concrete, terrazzo, 76 mm, h 8 mm
Lux available with different grain sizes

Application: Diamondpad, Wet, for granite, glasterrazzo, 76 mm, H 10 mm
All Grind with different grits available

Application: Diamondpad, Wet, for marble, granite, 76 mm, h 8 mm
Epox available with different grain sizes

Application: Diamondpad, Wet, for Microterrazzo, glasterrazzo, 76 mm, h 8 mm



Grinding Machine Schwamborn DSM 800S





+ technical data and information

Typ DSM 800S
Voltage V 400
Frequenz Hz 50
Motor 15 kW
working width 800 mm
work to the brim 10 mm
Grinding pressure 320-370 kg
Tool 230 mm
Speed, Tool 400 - 1200 min-1
water tank 15 l
extraction 76 mm
work weight 430 kg


+ matching tools

ETX-up pads, System DIF Diaflex - 270 mm, 3 pcs. required

Area of ​​application: For mounting the metal-bonded diamond
Shot Plate for foreign tools, - 270 mm, 3 pcs. required
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required

Area of ​​application: For mounting resin diamond pads
Additional weight, swivel, 2 x 45 kg kit = 2 pcs. to increase the grinding pressure
EX-SC red with different grits available
Application: For abrasive surfaces
EX-GC black with different grits available | Use Area: standard concrete
EX-HC yellow available with different grain sizes

Application: concrete, very hard
EX-VSF orange available with different grain sizes

Application: concrete and coatings, extremely hard
EX-SBC green available with different grain sizes

Application: natural stone, terrazzo, marble
EX-SBG blue with different grains available

Application: granite, hard rock
EX-pull D, R, gold

Application: coatings, adhesives
EX-pull S, R, gold

Application: coatings, adhesives
Best-Polish, dry available with different grain sizes

Application: Diamondpad, dry, concrete, cast stone, terrazzo, 76 mm, H 10 mm
hybrid with different grits available

Use Area: Diamondpad, dry, very aggressive for removing sanding marks, Concrete, Terrazzo, 76 mm, 8 mm H
Lux with different grits available

Use Area: Diamondpad, Wet, for granite, Glassterrazzo, 76 mm, H 10 mm
All Grind with different grits available

Use Area: Diamondpad, Wet, for marble, granite, 76 mm, 8 mm H
Epox with different grits available

Use Area: Diamondpad, Wet, for Micoterrazzo, glasterrazzo, 76 mm, 8 mm H



Grinding Machine Schwamborn ES 420S





+ technical data and information

Typ ES 420S
Voltage V 230
Frequenz Hz 50
Motor 1,6 kW
working width 406 mm
Brush level 54 g/cm
Tool 406 - 580 mm
Speed, Tool 140 min-1
extraction 38 mm
smoke level 58 dB(A)
work weight 43 kg


+ matching tools

driving plate, Pyramid foam rubber with centering for grinding wheels, 406 mm

Use area: For grinding wheels, cleaning pads, steel wool
Replacement Pyramid foam rubber disc, 406 mm
SDC 120, vacuum cleaner, 230V/50 Hz, 1200 W, V2A, with 10 anthers, cable, hose and connector No. 209900 for ES 420S
Dust bag for SDC 120
Holding basket for SDC 120
suction ring, with Bostenkranz, for No. 405401/517500/516610/
tool plate, metal, with a brush attachment, 406 mm, for installation of corundum, Velcroteller for diamond pads
kit, spare Korundschleifstein, K 20

Use area: For sanding screeds, leveling compounds, removal of paint and plaster residues PU = 5 pieces
grinding unit 4 head

Use: For fine sanding of parquet
velcro disc for abrasive paper, D 150 mm

Use area: For mounting of grinding wheels with Velcro closure
ETX-receiving plate assy, dia-410 mm

Use Area:. To accommodate metal-bonded diamond
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required

Application: For mounting resin diamond pads
grinding wheel 406 mm, K 16 different grains stock
WK-wheel- 406 mm, K 16
abrasive mesh 406 mm, K 60
grinding wheel, zirconium- 150 mm, K 24
EX-SSC available with different sizes
EX-GC black with different grains stock
EX-HC yellow with different grains stock
Epox with different grits available

Use Area: Diamondpad, Wet, for Micoterrazzo, glasterrazzo, 76 mm, 8 mm H



Grinding Machine, Schwamborn STR 701LVR





+ technical data and information

Typ STR 701LVR
Voltage V 230
Frequenz Hz 50
Motor 1,5 kW
working width 430 /510 mm
Brush pressure 51-210 g/cm
Speed, Tool 145 min-1
extraction 38 mm
Noise level 62 dB(A)
Gear gear / metal
guide rod 1200 mm
work weight 65 kg


+ matching tools

propellant plate, with Pyramid foam rubber, 430 mm, cpl. with grinding wheels centering
replacement Pyramid foam rubber disc, 406 mm
Diamondpadhalter, 4-head, 480 mm, 127 mm for diamond pads

Application: For grinding and polishing of natural stone floors with resin diamond
suction ring with tube 50 mm, for driving plate 517 600, WK-slip ring 526 800, 706 080 grinding unit, spring steel brush short 510200, ETX-receiving plate 795 240
additional weight, 24 kg, as a motor attachment

Use Area: The additional weight increases the working pressure and improves machine performance
slip ring corundum, cpl, K 16, 400 mm

Use Area:. grinding screed, hard filler, removing paint and mortar residue
slip ring corundum, cpl, K 30, 400 mm | Use Area:. grinding screed, hard filler, removing paint and mortar residue
WK-slip ring assy, K 16, 440 mm

Use Area:. grinding screed, hard filler, removing paint and mortar residue
ETX-receiving plate, 460 mm

Use area: For holding metal bonded diamond
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required

Application: For mounting KunstharzDiamondpads
STR-base-unit-5-head without grinding disc, 450 mm

Use Area: Sturdy steel construction, with dust-proof storage, flexible and damped tool holder, for heavy-duty use on even and uneven surfaces , very aggressive
WK-sanding pad, K 10, 127 mm, pack of 5 pcs

Use Area:. For grinding concrete, anhydrite, cement and resin screeds. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
WK-sanding pad, K 16, 127 mm, pack of 5 pcs

Use Area:. For grinding concrete, anhydrite, cement and resin screeds. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
diamond grinding discs, HC 20/30, 127 mm, pack of 5 pcs

Use Area:. For grinding of hard surfaces such as concrete, anhydrite screeds and resin. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
diamond grinding discs, SC 20/30, 127 mm, pack of 5 pcs

Use Area:. For grinding of hard surfaces such as concrete, anhydrite screeds and resin. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
Replacement grindingring -Korund K 16, 12xM12, -400 mm
Replacement grinding -Korund, K 30 12xM12, -400 mm
WK-Slip ring, K 16, -440 mm
Tornado hybrid with different grains stock
Tornado hybrid with different grains stock
support base for Tornado Hybrid, 430 mm
grinding wheel with different grains stock
WK-grinding wheel with different grains stock
abrasive mesh with different grains stock
EX-SSC red with different grits available

Application: For very abrasive surfaces
EX-GC black with different grits available

Application: concrete standard
EX-HC yellow with different grits available

Application: concrete, very hard
EX-SBC green available with different grains

Use Area: terrazzo, marble
EX-SGB blue available with different grains

Use Area: hard rock
ALL GRIND with different grits available

Use Area: Diamondpad, Wet, for Micoterrazzo, glasterrazzo, 76 mm, 8 mm H
ALL GRIND LUX with different grits available

Use Area: Diamondpad, Wet, for marble, granite, 76 mm, 8 mm H
scrub brush, PPN 0.7, medium, 510 mm
polishing brush, Union, 510 mm
scrub brush, PPN / wire, hard, 510 mm
scrub brush, PPN 0.5, 510 mm, soft
scrub brush, Sica, 180, 510 mm, hard
LS - Stabipad, 480 mm, 508 mm for pads
tank, 10 liters, F-rail 1200 mm
additional weight, 24 kg, as a motor attachment

Use Area: The additional weight increases the working pressure and improves machine performance
Milling plate surfaces, -430 mm

Application: For roughening of screeds, removing foam backing, paint residues and stubborn dirt in the cleaning industry
star wheel, large, required for 524200, 525700, 56 piece
bolts for 524200, 525700, 8 pieces required
spring steel brush, short, 430 mm

Use Area: removing foam, felt, jute, mortar, plaster, ice residues and stubborn dirt in the cleaning industry
cast corrugated wire brush, 510 mm

Use Area: cleaning and removing rust from steel surfaces
spring steel brush, slanted, 510 mm

Use Area: removing grass, moss, stop in sand
aggregate, 5-head, PPN / wire, 540 mm

Use Area: cleaning of concrete formwork and dirt on hard floors in the cleaning industry
aggregate, 5-head, wire 0.35- 540 mm

Use Area: cleaning and removing rust from steel surfaces
spring steel brush, short- 510 mm, f 510200
spring steel, 540 mm, for 520600
PPN / wire, 540 mm, for 511200
wire 0.35- 540 mm, for 511300
steel wool pad 430 mm
Pad -430 mm, white
Pad -430 mm, red
Pad -430 mm, blue
Pad -430 mm, brown
Pad -430 mm, Hi-Pro
Pad -430 mm, black



Grinding machine Schwamborn STR 702S





+ technical data and information

Typ STR 702S
Voltage V 400
Frequenz Hz 50
Motor 2,0 kW
working width 430 /510 mm
Brush pressure 51-210 g/cm
Speed, Tool 145 min-1
extraction 38 mm
Noise level 62 dB(A)
Gear Gear /Metal
guide rod 1200 mm
work weight 65 kg


+ matching tools

propellant plate, with Pyramid foam rubber, 430 mm, cpl. with grinding wheels centering
replacement Pyramid foam rubber disc, 406 mm
Diamondpadhalter, 4-head, 480 mm, 127 mm for diamond pads

Application: For grinding and polishing of natural stone floors with resin diamond
suction ring with tube 50 mm, for driving plate 517 600, WK-slip ring 526 800, 706 080 grinding unit, spring steel brush short 510200, ETX-receiving plate 795 240
additional weight, 24 kg, as a motor attachment

Use Area: The additional weight increases the working pressure and improves machine performance
slip ring corundum, cpl, K 16, 400 mm

Use Area:. grinding screed, hard filler, removing paint and mortar residue
slip ring corundum, cpl, K 30, 400 mm

Use Area:. grinding screed, hard filler, removing paint and mortar residue
WK-slip ring assy, K 16, 440 mm

Use Area:. grinding screed, hard filler, removing paint and mortar residue
ETX-receiving plate, 460 mm

Use area: For holding metal bonded diamond
ETX-pick-up shoe, - 76 mm for diamond pads 9 units required

Application: For mounting Resin diamond pads
STR-base-unit-5-head without grinding disc, 450 mm

Use Area: Sturdy steel construction, with dust-proof storage, flexible and damped tool holder, for heavy-duty use on even and uneven surfaces , very aggressive
WK-sanding pad, K 10, 127 mm, pack of 5 pcs

Use Area:. For grinding concrete, anhydrite, cement and resin screeds. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
WK-sanding pad, K 16, 127 mm, pack of 5 pcs

Use Area:. For grinding concrete, anhydrite, cement and resin screeds. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
Diamond grinding discs, HC 20/30, 127 mm, pack of 5 pcs

Use Area:. For grinding of hard surfaces such as concrete, anhydrite screeds and resin. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
Diamond grinding discs, SC 20/30, 127 mm, pack of 5 pcs

Use Area:. For grinding of hard surfaces such as concrete, anhydrite screeds and resin. Roughen smooth surfaces and preparation for recoating. Removal of old coatings, mortar and adhesive residues.
Replacement grinding ring-Korund, K 16, 12xM12, -400 mm
Replacement grinding ring-Korund, K 30 12xM12, -400 mm
WK-Grinding-Ring, K 16, -440 mm
Tornado hybrid available with different grain sizes
Tornado hybrid available with different grain sizes
Carrier plate for Tornado Hybrid, 430 mm
Grinding wheel available with different grain sizes
WK-wheel available with different grain sizes
Abrasive mesh available with different grain sizes
EX-SSC red with different grits available

Application: For very abrasive surfaces
EX-GC black with different grits available

Application: concrete standard
EX-HC yellow with different grits available

Application: concrete, very hard
EX-SBC green available with different grains

Use Area: terrazzo, marble
EX-SGB blue available with different grains

Use Area: hard rock
ALL GRIND with different grits available

Use Area: Diamondpad, Wet, for Micoterrazzo, glasterrazzo, 76 mm, 8 mm H
ALL GRIND LUX with different grits available

Use Area: Diamondpad, Wet, for marble, granite, 76 mm, 8 mm H
scrub brush, PPN 0.7, medium, 510 mm
polishing brush, Union, 510 mm
scrub brush, PPN / wire, hard, 510 mm
scrub brush, PPN 0.5, 510 mm, soft
scrub brush, Sica, 180, 510 mm, hard
LS - Stabipad, 480 mm, 508 mm for pads
tank, 10 liters, F-rail 1200 mm
additional weight, 24 kg, as a motor attachment

Use Area: The additional weight increases the working pressure and improves machine performance
Milling plate surfaces, 430 mm

Use area: For roughening of screeds, removing foam backing, paint residues and stubborn dirt in the cleaning industry
star wheel, large, required for 524200, 525700, 56 piece
bolts for 524200, 525700, 8 pieces required
spring steel brush, short, 430 mm

Use Area: removing foam, felt, jute, mortar, plaster, ice residues and stubborn dirt in the cleaning industry
cast corrugated wire brush, 510 mm

Use Area: cleaning and removing rust from steel surfaces
spring steel brush, slanted, 510 mm

Use Area: removing grass, moss, stop in sand
aggregate, 5-head, PPN / wire, 540 mm

Use Area: cleaning of concrete formwork and dirt on hard floors in the cleaning industry
aggregate, 5-head, wire 0.35- 540 mm

Use Area: cleaning and removing rust from steel surfaces
spring steel brush, short- 510 mm, f 510200
spring steel, 540 mm, for 520600
PPN / wire, 540 mm, for 511200
wire 0.35- 540 mm, for 511300
steel wool pad 430 mm
Pad -430 mm, white
Pad -430 mm, red
Pad -430 mm, blue
Pad -430 mm, brown
Pad -430 mm, Hi-Pro
Pad -430 mm, black



Milling Machine Schwamborn BEF 201 E





+ technical data and information

Typ BEF 201 E
Voltage V 230
Frequenz Hz 50
Motor 2,2 kW
working width 200 mm
work to the brim 45/7 mm
Speed, Tool 1750 min-1
extraction 50 mm
Depth of cut 2 mm
Equipment, standard 5-Pkt.-HM-lamellae, 42 x 16
Rotor axes 4 piece
use concrete, screed, industrial flooring, coatings


+ matching tools

rotor with 5-point carbide blades, 42 x 16 mm

Use area: Rotor with 8 holes for the slats bars = longer life and lower milling cost per m
rotor with 5-point carbide blades, 42 x 16 mm, cowshed

Einsatzgebeit: special rotor with special mounting to roughen slippery surfaces in cowsheds
rotor with spiral blade, 40 x 22 mm

Application: Rotor with 8 holes for the slats bars = longer life and lower Milling cost per m
rotor with 4 blades rods, 10 mm, without plates

Use area: Rotor with 8 holes for the slats bars = longer life and lower milling cost per m
lamellar rod, 4 pieces required
edger cpl. with 5-point HM Cutters
5-point carbide blades, 42 x 16 mm, 70 pieces required

Einsatzgebeit: Universal tool for roughening, grooving on concrete and screed remove coatings and markings, roughening slippery surfaces, leveling of unevenness
5-point HME blades, 42 x 16 mm, 70 pieces required

Application: Universal tool for roughening, grooving on concrete and screed remove coatings and markings, roughening slippery surfaces, leveling of unevenness
washers, hardened, 68 pieces in HM-fin assembly, 24 pieces in Schll lamella assembly
Milling cutters, 40 x 22 mm, 24 pieces required

Application: Removal of permanently elastic coatings, plastic coatings or waterproof coatings, road markings, bitumen or rubber deposits



Milling Machine Schwamborn BEF 250 E





+ technical data and information

Typ BEF 250 E
Voltage V 400
Frequenz Hz 50
Motor 5,5 kW
working width 250 mm
work to the brim 65 mm
Speed, Tool 1000 min-1
extraction 70 mm
Milling depth 5 mm
Equipment, standard 8-Pkt.-HM-lamellae, 80 x 30
Rotor axes 4 Pcs.
brake system mechanically
use concrete, screed, industrial flooring, asphalt, coatings


+ matching tools

rotor with 8-point HM slats, 80 x 30 mm

Use Area: rotor with replaceable wear bushings for the slat bars = longer life and lower milling cost per m
rotor with spiral blade, 80 x 20 mm

Einsatzgebeit: rotor with replaceable wear bushings for the slat bars = longer life and lower milling cost per m
rotor with 4 blades rods, 20 mm, without plates

Einsatzgebeit: rotor with replaceable wear bushings for the slat bars = longer life and lower milling cost per m
wear bushings, kit = 8
lamellar rod kit = 4 pieces
8-point HM slats, 80 x 30 mm, 72 pieces required

Application: Universal tool for roughening, grooving on concrete and screed, remove coatings and markings, roughening slippery surfaces, leveling of unevenness
8-point HME slats, 80 x 30 mm, 72 pieces required

Einsatzgebeit: Universal tool for roughening, grooving on concrete and screed, remove coatings and markings, roughening slippery surfaces, leveling of unevenness
washers, hardened, 72 pieces in HM-fin assembly, 36 pieces in Schll lamella assembly
Milling cutters, 80 x 20 mm, 36 pieces required

Application: Removal of permanently elastic coatings, plastic coatings or waterproof coatings, road markings, bitumen or rubber deposits



Milling Machine Schwamborn BEF 320EX





+ technical data and information

Typ BEF 320 EX
Voltage V 400
Frequenz Hz 50
Motor 11 kW
working width 320 mm
work to the brim 72 mm
extraction 76 mm
milling depth 5 mm
4x4 wheel drive hydraulically
use milling of concrete, grooving of concrete surfaces, removing coatings and markings
Weight 365 kg


+ matching tools